PREPARATION OF 3A ZEOLITE LOADED MEMBRANE FOR HYDROGEN RECOVERY FROM WASTE GAS
In this study, carboxy methyl cellulose based mixed matrix membranes were prepared to remove H2/CH4 and CO/CH4 gas mixtures and characterization experiments were performed. Zeolite 3A was selected as inorganic material. It is essential in gas separation process that the membrane should be non-porous so the structure of membrane was determined by means of polarized light microscope and contact angle test. The thermal behavior of membrane under high temperature condition was determined by using thermogravimetric analysis (TGA).
Faraji S, Gharebagh RS, Mostoufi N. Hydrogen Recovery from Refinery Off-gases. Journal of Applied Sciences. 2005;5:459-464.
Sanders DF, Smith ZP, Guo R, Robeson LM, McGrath JE, Paul DR, Freeman BD. Energy-efficient polymeric gas separation membranes for a sustainable future: A review. Polymer. 2013; 54: 4729–4761.
Ismail A, David LIB. A review on the latest development of carbon membranes for gas separation. Journal of Membrane Science. 2001;193: 1-18.
Ulbricht M. Advanced functional polymer membranes. Polymer. 2006; 47: 2217–2262.
Abedini R, Amir N. Application Of Membrane In Gas Separation Processes: Its Suitability And Mechanisms. Petroleum & Coal. 2010;52:69-80.
Bernardo P, Drioli E, Golemm G. Membrane Gas Separation: A Review/State of the Art. Ind. Eng. Chem. Res., 2009;48:4638–4660.
Yang T, Chung TS. High performance ZIF-8/PBI nano-composite membranes for high temperature hydrogen separation consisting of carbon monoxide and water vapor. International Journal of Hydrogen Energy. 2013; 38: 229-239.
Han J, Lee W, Choi JM, Patel R, Byoung-Ryul M. Characterization of polyethersulfone polyimide blend membranes prepared by a drywet phase inversion Precipitation kinetics, morphology and gas separation. Journal of Membrane Science.2010; 351: 141-148.
Nigiz F, Dogan H, Hilmioglu N. Pervaporation of ethanol/water mixtures using clinoptilolite and 4A filled sodium alginate membranes. Desalination. 2012;300:24-31.
Liu G. A step-by-step method of rule-of-mixture of fiber- and particle-reinforced composite materials. Composite Structures. 1997;40(3-4):313-322.
J. Turk. Chem. Soc., Sect. B: Chem. Eng.