Evaluation of Colemanite Waste as Aggregate Hot Mix Asphalt Concrete

Nihat MOROVA, Serdal TERZİ
1.792 746

Öz


In this study usability of waste colemanite which is obtained after cutting blok colemanites for giving proper shape to bloks as an aggregate in hot mix asphalt. For this aim asphalt concrete samples were prepared with four different aggregate groups and optimum bitumen content was determined. First of all only limestone was used as an aggregate. After that, only colemanite aggregate was used with same aggregate gradation. Then, the next step of the study, marshall samples were produced by changing coarse and fine aggregate gradation as limestone and colemanite and masrhall test were conducted. When evaluated the results samples which produced with only limestone aggregate gave the maximum Marshall Stability value. When handled other mixture groups (Only colemanite, colemanite as coarse aggregate-limestone as fine aggregate, colemanite as fine aggregate-limestone as coarse aggregate) all groups were verified specification limits. As a result, especially in areas where there is widespread colemanite waste, if transportation costs did not exceed the cost of limestone, colemanite stone waste could be used instead of limestone in asphalt concrete mixtures as fine aggregate.

Anahtar kelimeler


Marshall stabilitesi Kolemanit Atık Agrega Esnek üstyapı

Tam metin:

PDF


Referanslar


Aragão F. T. S., Lee , J., Kim , Y-R., Karki, P., Material- specific effects of hydrated lime on the properties and performance behavior of asphalt mixtures and asphaltic pavements, Construction and Building Materials 24, 538–544. 2010.

ASTM C 127-88. Test method for specific gravity and adsorption of coarse aggregate. USA: Annual Book of ASTM Standards; 1992.

ASTM C 128-88. Test method for specific gravity and adsorption of fine aggregate. USA: Annual Book of ASTM Standards; 1992.

ASTM C 131-96. Standard test method for resistance to abrasion of small size coarse aggregate by use of the Los Angeles machine. Annual Book of ASTM Standards; 1996.

ASTM D113, Standard Test Method for Ductility of Bituminous Materials, Annual Book of ASTM Standards USA, 1992.

ASTM D36, Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), Annual Book of ASTM Standards USA, 1992.

ASTM D5, Standard Test Method for Penetration of Bituminous Materials, Annual Book of ASTM Standards USA, 1992.

ASTM D70 Standard Test Method for Density of Semi- Solid Bituminous Materials (Pycnometer Method), Annual Book of ASTM Standards USA, 1992.

ASTM D92, Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester, Annual Book of ASTM Standards USA, 1992.

Binici, H., Durgun, M.Y., Corrosion Performance of Steel Rebars Coated with Additive Containing Dyes, IMO Technical Journal, 6141-6162, Text 388, 2012.

Chadbourn, B. A., Skok,, E. L., Newcomb, D. E., Crow B. L., Spindle, S., The Effect of Voids in Mineral Aggregate (VMA) on Hot-Mix Asphalt Pavements, Minnesota Department of Transportation, Final

Report, MN/RC - 2000-13, 1999.

Chen, M., Lin, J., Wu, S., Liu, C., Utilization of recycled brick powder as alternative filler in asphalt mixture, Construction and Building Materials, Vol. 25, pp 1532–1536, 2011.

Çetin, S., The Investigation of Afyon Zone Volcanic Rocks In Hot Mix Asphalt As Aggregate Afyon Kocatepe University, Institute of Science Department of Construction Education, Master Thesis, Afyonkarahisar, 2007.

Dhir, R.K. Csetenyi, Dyer, L.J., T.D., Smith, G.W., Cleaned oil-drill cuttings for use as filler in bituminous mixtures, Construction and Building Materials, Vol 24, pp 322–325, 2010.

Do, H.S., Mun, P. H., Keun, R. S., A Study On Engineering Characteristics Of Asphalt Concrete

Using Filler With Recycled Waste Lime, Waste Management, Vol. 28, pp 191–199, 2008.

General Directorate of Highways, State Highways Technical Specifications (HTS), Ankara, 2006.

Huang B., Dong, Q., Burdette, E. G., Laboratory Evaluation of Incorporating Waste Ceramic Materials into Portland Cement and Asphaltic Concrete, Construction and Building Materials, Vol.23, No.12, , pp.3451-3456, 2009.

İbrahim A., Faisal, S., Jamil, N., Use of basalt in asphalt concrete mixes, Construction and Building Materials 23, 498–506, 2009.

Karakuş, A., Investigating On Possible Use Of Diyarbakir Basalt Waste in Stone Mastic Asphalt, Construction and Building Materials, 25, 3502–3507, 2011.

Karaşahin M., Terzi, Evaluation of Marble Waste Dust in the Mixture of Asphaltic Concrete, Construction & Building Materials, V. 21, pp 617-620, 2007.

Oruç, F., Sabah, E., Erkan, Z. E., Türkiye'de Bor Atıklarını Sektörel Bazda Değerlendirme Stratejileri, Il.Uluslararası Bor Sempozyumu, 23-25 Eylül 2004 Eskişehir Türkiye (In Turkish).

Özdemir, M., Öztürk, N.U., 2003. Utilization Of Clay Wastes Containing Boron As Cement Additives, Cement and Concrete Research, 33,1659-1661.

Pérez, I., Pasandín, A.R, Medina, L, Hot mix asphalt using C&D waste as coarse aggregates, Materials and Design, doi:10.1016/j.matdes.2010.12.058, 2011.

Sayar, A., Ham ve Kalsine Kolemanit Atığının Duvar Karosu Bünyesinde Kullanılabilirliğinin Araştırılması, Dumlupınar Üniversitesi, Fen Bilimleri Enstitüsü, YüksekLisans Tezi, 2007. (In Turkish).

Topkaya, A.& Yurdakul, H., 2001, Etibank Kırka Boraks İşletmesi Konsantratör ve Türev Atıklarının Duvar Karosu Bünyesinde Kullanılabilirliğinin Araştırılması, Dumlupınar Üniversitesi Seramik Mühendisliği Ana Bilim Dalı Lisans Tezi, Kütahya, 32- 45 s. (In Turkish).

Umar, F., Ağar, E., Yol Üst Yapısı, İTÜ İnşaat Fakültesi Matbaası, İstanbul, 1991

Uslu, T., Arol, A.I., 2004. Use of Boron Waste As An Additive In Red Bricks, Waste Management, 24, 217- 220.

Ustabaş, İ., Investigting Usability of Kolemanite and Ulexite

http://www.thbb.org/Files/File/[367-375].pdf Cement,

02013, Yılmaz, M., vd. Effects of Using Asphaltite as Filler on Mechanical Properties of Hot Mix Asphalt, Construction

doi:1016/j.conbuildmat.2011.04.072, 2011. Building

Materials, Yurdakul, A., 2002, Ham ve Kalsine Kolemanit Katı Atığının Porselen Karo Bünyelerde Kullanım Olanaklarının Araştırılması, Dumlupınar Üniversitesi Fen bilimleri Enstitüsü Seramik Mühendisliği Ana bilim Dalı Yüksek Lisans Tezi, Kütahya, 32-43 s. (In Turkish).




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.

e-ISSN: 1308-6529